1700 APX2 Hochdruck

High Temperature Graphite Sheet with Multiple Foil Inserts

Applications

Teadit GR1700 is commonly used in pipe flanges, equipment and pressure vessels; non-typical geometry flanges tongue/groove and heat exchanger flanges. It is also suitable for use in the manufacture of gaskets for sight glasses, pumps, fittings and valves, etc.

Construction

TEADIT GR1700 - SIGRAFLEX APX2 Hochdruck is a multilayer, high-strength gasket-sheet designed for high-temperature applica­tions. The sheet is comprised of 0.020” thick layers of highly oxidation resistant SIGRAFLEX APX2 flexible graphite and 0.002” thick inserts of 316L stainless steel foil, manufactured with SIGRAFLEX Hochdruck technology.

Properties

Teadit GR1700 APX2 Hochdruck is specifically designed for high temperature flat gasket applications. It combines the outstanding weight loss characteristics of SIGRAFLEX APX2 flexible graphite and reinforcing layers of metal in SIGRAFLEX Hochdruck technology.
Gaskets made from this type of sheet perform well in critical applications due to high mechanical strength and blow-out resistance, working pressure resistance up to 3600 psi (250 bar), excellent chemical resistance, very low cold or hot relaxation, and a maximum permissible gasket stress. Among its advantages, there is good conformation to sealing surface, excellent torque retention and high sealability. The thermal stability of SIGRAFLEX APX2 is superior to that of standard grades of graphite foil. This is reflected by its mass loss curve, whose temperatures for any given mass loss are about 150ºC higher.

Service Limits

Temperature ºC Minimum Service: -250
Maximum Service:

650

Pressure bar 250
Availability 59.1 x 59.1 in
Thickness 1/16", 1/8"
Typical Physical Properties:
Bulk Density - ASTM C559 1121 Kg/m³
Compressibility - ASTM F36 35%
Recovery - ASTM F36 15%
Creep Relaxation - ASTM F38 - (flexible graphite only) < 4%
Carbon Content - ASTM D5373 ≥98%
Ash Content - ASTM C562 ≤2%
Total sulfur - ASTM D4239B < 300ppm
Total Chlorides - ASTM 4208/D4327 ≤25 ppm
Oxidation rate in air @670ºC - 1238ºF - LECO TGA ≤1%
Number of Inserts
Number of 316L SS foil Inserts 1/16 thk 2
Number of 316L SS foil Inserts 1/8 thk 5

 

 

 

 

 

TEADIT® Deutschland GmbH

Schanzenstraße 35, 51063 Köln, Deutschland

Phone: +49 (0)221/922 342-0

Fax: +49 (0)221/922 342-22

TEADIT® International Produktions GmbH

Rosenheimer Str. 10, A-6330 Kufstein, Österreich

Phone: +43-5372-64020-0

Fax: +43-5372-64020-20

 

2016 © Teadit | All Material Copyright are reserved.

 

This website uses modern technologies such as JavaScript, CSS, HTML5 and WebFonts; because of this, it is best viewed in modern browsers.

We recommend to use Google Chrome as your primary browser for this website.