NA1006

Construction and Applications

NA1006 is a non-asbestos jointing-sheet material produced from aramid fibers, bonded with Nitrile rubber (NBR). It is manufactured through the hot calender process under rigorous quality control standards that are registered under ISO 9001 certification.

NA1006 is suitable for water, gases, oils, and acids in mild service.

Service Limits

Temperature (ºC) Continuous Service: 220
Maximum Service: 300
Pressure (bar) Maximum Service: 80
Availability (in mm) 1.500 x 1.600
1.500 x 3.200
Thickness (in mm) 0.8/1.0/1.6/2.0 and 3.0
Color Green
Typical Physical Properties:
Density - ASTM F1315 app. 1,69 -1,90 g/cm3
Compressibility - ASTM F36 7-17%
Recovery - ASTM F36 50%
Ignition loss - ASTM F495 35%
Tensile Strength - ASTM F152 1300 psi
Thickness Increase - ASTM F146 - after 5hr
ASTM Oil IRM 903 Nr.3 @ 150ºC 15%
Fuel B, @ 25ºC 10%
Weight Increase - ASTM F146 - after 5hr
ASTM Oil IRM 903 Nr.3 @ 150ºC 15%
Fuel B, @ 25ºC 15%
Torque Retention - DIN 52913 2 N/mm2

 

 

 

 

TEADIT® Deutschland GmbH

Schanzenstraße 35, 51063 Köln, Deutschland

Phone: +49 (0)221/922 342-0

Fax: +49 (0)221/922 342-22

TEADIT® International Produktions GmbH

Rosenheimer Str. 10, A-6330 Kufstein, Österreich

Phone: +43-5372-64020-0

Fax: +43-5372-64020-20

 

2016 © Teadit | All Material Copyright are reserved.

 

This website uses modern technologies such as JavaScript, CSS, HTML5 and WebFonts; because of this, it is best viewed in modern browsers.

We recommend to use Google Chrome as your primary browser for this website.