Style NA1001 is a very good general service gasket material that has numerous applications in the process industries and in the water and wastewater industry. It is also commonly used in equipment such as valves and pumps. Style NA1001 is suitable for service handling the following general media categories:
Style NA1001 is a compressed fiber sheet gasket material produced from a combination of aramid and other synthetic fibers and bonded with nitrile rubber (NBR). It is manufactured through the hot calendar process under rigorous quality control standards that are registered under ISO-9001 certification.
Temperature ºF (ºC) | Continuous Service: 464 (240) |
Maximum Service: 750 (400) | |
Pressure psi (bar) | Continuous Service: 725 (50) |
Maximum Service: 1595 (110) |
Availability | 59 x 63 in |
59 x 126 in | |
118 x 126 in | |
Thickness | 1/64", 1/32", 1/16", 3/32", 1/8" |
Color | Green, White, or Blue |
ASTM F104 | F712120E22M5 |
Typical Physical Properties: | ||
---|---|---|
Density | 109 lb/ft3 (1.75 g/cm3) | |
Compressibility - ASTM F36 | 7-17% | |
Recovery - ASTM F36 | min 45% | |
Tensile Strength Across Grain - ASTM F38 | 1670psi (11.5 N/mm2) | |
Ignition Loss - ASTM F495 | max 34% | |
Thickness Increase - ASTM F146 - after 5hr | ||
- ASTM Oil IRM 903 @ 300ºF (150ºC) | max 12% | |
- Fuel B, @ 77ºF (25ºC) | max 10% | |
Weight Increase - ASTM F146 - after 5hr | ||
- ASTM Oil IRM903 @ 300ºF (150ºC) | max 15% | |
- Fuel B, @ 77ºF (25ºC) | max 15% | |
Creep Relaxation - ASTM F38 | 25% | |
Torque Retention (DIN 52913) | 28N/mm2 | |
Sealability @ 1000psi - ASTM F37 | max .25 ml/hr |
TEADIT NORTH AMERICA - Houston, USA
10545 Red Bluff Road, Pasadena, TX 77507
Phone: (281) 476-3900 - Fax: 281-476-3999 – TOLL FREE: 800-999-0198
2015© Teadit | All Material Copyright are reserved.
This website uses modern technologies such as JavaScript, CSS, HTML5 and WebFonts; because of this, it is best viewed in modern browsers.
We recommend to use Google Chrome as your primary browser for this website.