PTFE Products

A manufacturer of blowers was having difficulty sealing a new nitrogen blower for a large manufacturer of commercial and consumer products. Blowers can be very challenging sealing applications, as they often have very complex sealing areas which require a non-standard gasket as standard flat gaskets can be extraordinarily difficult to install, if even possible, and require a lengthy installation process

A major oil and gas company had an accident at a gas separation facility in the Middle East in a system in oxygen service. This is a critical service which poses a large safety risk to the facility and requires very careful selection of materials and extreme cleanliness standards. After the incident the customer initiated the process of re-evaluating the materials, including sealing products, that they were utilizing in this extremely critical service. The customer began searching for the best technical solution for packing material to equip all their on/off valves in the plant with. Download the case history here and find out how Teadit provided an engineered solution!

A large sugar mill was having issues with constant leakage out of their sugar crystallizer mixer, which is operating at 30psi and 180°F, with a rotational speed of 10RPM. Agitators on large mixers such as this can pose more challenges to braided packing than would appear from the basic operating parameters. Large agitators in general tend to have challenges with shaft alignment which can pose a serious issue for braided packing as it creates uneven wear on the packing and can lead to premature failure. Find out how Teadit provided two unique solutions for this type of application!